Scale-down · 17 Nov 2026

A phenomenon you'll never catch in a benchtop reactor

We simulated a 2000 L reactor with agitation scaled by tip speed from an Ambr250 (500 rpm became ~28 rpm) at 0.1 vvm aeration. With stirring and gassing combined, the bubble plume completely broke the impeller's downflow, a gas-flow-limited mixing regime that only appears at large scale.

We simulated a large-scale setup for a 2000 L reactor in Siemens M-Star CFD. Agitation was scaled by tip speed, so 500 rpm in an Ambr250 became ~28 rpm in the 2000 L reactor. Aeration was 0.1 vvm. We placed three hydrodynamic scenarios side by side, and the behavior was very surprising.

Bubbles only, without stirring: pure buoyancy. The bubble column alone already drives a strong upward plume.

Stirring plus 0.1 vvm: this is the interesting one. The bubble plume completely breaks the impeller's downflow. This is not classical flooding but a gas-flow-limited mixing regime that you only see at large scale. The impeller pumps down, the gas pushes up, and the gas wins.

Stirring only: a clean downdraft, but mixing is still slow at this volume when no baffles are present.

The key point: if you scale only by tip speed, you will run into hydrodynamic phenomena that never appear in small-scale systems, like this gas-driven collapse of circulation. This is why we developed our pDS downscale reactors. They are designed to replicate actual large-scale mixing behavior, including regimes where gas interferes with the flow, instead of just matching a tip-speed number or power input.

Get in touch

Let's find out how your process reacts to scale

Tell us your system and target scale - we come back with a proposal for your insert set.

Lena Achleitner
Lena AchleitnerSenior Bioprocess Engineer, Key Account Managerlena.achleitner@p4b.io